Ønsker at en kan legge inn 1 gang normen en bruker på samme utstyr. Nå må en legge inn normen hver gang på samme utstyr pr jobb. Unødvendig mange klikk for samme norm pr jobb. Skifter en kontroll på utstyr så legger en inn 1 gang en ny norm.
English translation:
Would like to be able to enter once the norm you use on the same equipment. Now you have to enter the norm each time on the same equipment per job. Unnecessarily many clicks for the same norm per job. If a check on equipment is changed, a new norm is entered once.
As the Onix Community admin, please let me add an English translation to your post so that it is accessible to all Community users. I’d appreciate it a lot if you could take a look and let me know if the translation needs improving
Thank you for sharing your idea.
Are you aware of the possibility to add default tested according to value on control category level. Can you try this and see if this will cover your need.
When you create a new job , the tested according to field in the job will automatically then be set to the default value inserted on the control category for the selected equipment.
We update this Product Idea to “In Discussion”.
Please let me know if this will cover your need and if you or other users have more input related to this suggestion.
Thank you for your idea to make Onix Work more efficient.
We have discussed this internally again and we do not have any specific plans of implementing this in near future. But we like your idea and will keep it in mind for eventually future functionality.
We update the tag for this idea to “To Be Considered” and if you or other users have more comments related to this suggestion, please add your comment to this suggestion.
